MKE04Z128VLD4
Category: ARM Microcontrollers , MCUs NXP
NXP The Kinetis KE04 MCU family delivers a next-generation solution with enhanced ESD/EMC performance for cost-sensitive, high-reliability device applications used in high electrical noise environments. Offers a cost-effective 32-bit solution featuring low power and high robustness Provides a pin-compatibility within the Kinetis E series portfolio, as well as pin compatibility with Freescale's 8-bit S08P family Includes a powerful array of analog, communication and timing, and control peripherals with varying flash memory size and pin count Packaging: TRYSupplier Type: Authorized Distributor735 Qty Price 51 17.6788 60 17.3079 110 16.8134 260 16.5662 510 16.1953 2,600 15.8244 5,100 15.3299
Log in to Buy
MKE04Z128VLD4 quantity
This product is already in your quote request list.
S9S08SG8E2CTGR
Category: 8 Bit Microcontrollers NXP
NXP Freescale’s 8-bit S08SG family of microcontrollers (MCUs) is an entry-level to mid-range offering designed for LIN slave, general market, high-temperature (up to 150 °C ambient) and space-constrained applications. The SG is easy to design into an application because of its non-intrusive, single-wire background debug module (BDM), which allows you to read registers without stopping execution on the chip. This reduces development time, since changes can be made while in application and in real time. It also allows debug access in constrained locations. The SG helps to lower cost, save board space and improve quality with on-chip components by eliminating the need for external crystal, low-voltage interrupt (LVI) circuit, voltage regulator, I/O mux, watchdog circuit, analog-to-digital converter (ADC) and development tools. The SG family is also pin-compatible with the S08EL and S08SL families. This flexibility allows for upgrading and downgrading without major board redesign or long and expensive development times. Packaging: TRSupplier Type: Authorized Distributor5,000 Qty Price 5,000 2.293 10,000 2.2432 20,000 2.1767 30,000 2.1268 40,000 2.077
Log in to Buy
S9S08SG8E2CTGR quantity
This product is already in your quote request list.
ATMEGA328PB-MNR
Category: MCUs Microchip Technology
Microchip Technology MCU 8-bit AVR RISC 32KB Flash 2.5V/3.3V/5V 32-Pin VQFN EP T/R Packaging: N/ASupplier Type: Authorized Distributor8,833 Qty Price 0 1.7904 1 1.29888 10 1.29372 25 1.2426 100 1.18608 250 1.18056 500 1.17504 1,000 1.1694 3,000 1.16376 6,000 1.158
Log in to Buy
ATMEGA328PB-MNR quantity
This product is already in your quote request list.
PIC16LF88-I/SO
Category: MCUs Microchip Technology
Microchip Technology MCU 8-bit PIC RISC 7KB Flash 2.5V/3.3V/5V 18-Pin SOIC W Tube Packaging: N/ASupplier Type: Authorized Distributor1
Log in to Buy
PIC16LF88-I/SO quantity
This product is already in your quote request list.
DSPIC30F6010A-30I/PT
Category: 16 Bit Digital Signal Controller Dsc , MCUs Microchip
Microchip dsPIC30F Series 8 kB RAM 144 kB Flash 16-Bit Digital Signal Controller - TQFP-80 Packaging: TRAYSupplier Type: Authorized Distributor595 Qty Price 1 15.1776 4 15.1776 10 15.1776 25 15.1776 40 15.1776
Log in to Buy
DSPIC30F6010A-30I/PT quantity
This product is already in your quote request list.
PIC16F616-I/SL
Category: 8 Bit Microcontrollers , MCUs Microchip
Microchip PIC16F Series 3.5 KB Flash 128 B RAM 20 MHz 8-Bit Microcontroller - SOIC-14 Packaging: TUBESupplier Type: Authorized Distributor5,405 Qty Price 1 1.364 30 1.364 75 1.364 200 1.364 400 1.364
Log in to Buy
PIC16F616-I/SL quantity
This product is already in your quote request list.
MCP2551T-I/SN
Category: Can , CAN Interfaces , CAN Transceivers , Controller Area Network Microchip
Microchip The MCP2551 is a high-speed CAN, fault-tolerant device that serves as the interface between a CAN protocol controller and the physical bus. The MCP2551 device provides differential transmit and receive capability for the CAN protocol controller, and is fully compatible with the ISO-11898 standard, including 24V requirements. It will operate at speeds of up to 1 Mb/s.Typically, each node in a CAN system must have a device to convert the digital signals generated by a CAN controller to signals suitable for transmission over the bus cabling (differential output). It also provides a buffer between the CAN controller and the high-voltage spikes that can be generated on the CAN bus by outside sources (EMI, ESD, electrical transients, etc.). Packaging: TAPSupplier Type: Authorized Distributor11,254
Log in to Buy
MCP2551T-I/SN quantity
This product is already in your quote request list.
ATMEGA64A-AU
Category: 8 Bit Microcontrollers , MCUs Microchip
Microchip The AVR core combines a rich instruction set with 32 general purpose working registers. All the 32 registers are directly connected to the Arithmetic Logic Unit (ALU), allowing two independent registers to be accessed in one single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers. The ATmega64A provides the following features: 64 Kbytes In-System Programmable Flash with ReadWhile- Write capabilities, 2 Kbytes EEPROM, 4 Kbytes SRAM, 53 general purpose I/O lines, 32 general purpose working registers, Real Time Counter (RTC), four flexible Timer/Counters with compare modes and PWM, two USARTs, a byte oriented Two-wire Serial Interface, an 8-channel, 10-bit ADC with optional differential input stage with programmable gain, programmable Watchdog Timer with internal Oscillator, an SPI serial port, IEEE std. 1149.1 compliant JTAG test interface, also used for accessing the On-chip Debug system and programming, and six software selectable power saving modes. The Idle mode stops the CPU while allowing the SRAM, Timer/Counters, SPI port, and interrupt system to continue functioning. The Power-down mode saves the register contents but freezes the Oscillator, disabling all other chip functions until the next interrupt or Hardware Reset. In Power-save mode, the asynchronous timer continues to run, allowing the user to maintain a timer base while the rest of the device is sleeping. The ADC Noise Reduction mode stops the CPU and all I/O modules except asynchronous timer and ADC, to minimize switching noise during ADC conversions. In Standby mode, the crystal/resonator Oscillator is running while the rest of the device is sleeping. This allows very fast start-up combined with low power consumption. In Extended Standby mode, both the main Oscillator and the asynchronous timer continue to run. Packaging: TRYSupplier Type: Authorized Distributor112 Qty Price 90 6.5472 100 5.9272
Log in to Buy
ATMEGA64A-AU quantity
This product is already in your quote request list.
ATMEGA64A-AUR
Category: MCUs Microchip Technology
Microchip Technology MCU 8-bit AVR RISC 64KB Flash 3.3V/5V 64-Pin TQFP T/R Packaging: N/ASupplier Type: Authorized Distributor1,850 Qty Price 1 7.3185 10 7.2466 25 7.1263 100 7.0072 250 6.887 500 6.7667 1,000 6.6464
Log in to Buy
ATMEGA64A-AUR quantity
This product is already in your quote request list.
MCP9700AT-E/TT
Category: Electromechanical , Temperature , Temperature and Humidity Sensors , Temperature Sensors Microchip
Microchip The MCP9700A family of Linear Active Thermistor™ Integrated Circuit (IC) is an analog temperature sensor that converts temperature to analog voltage. It's a low-cost, low-power sensor with an accuracy of ±2°C from 0°C to +70°C while consuming 6 µA (typical) of operating current.Unlike resistive sensors (such as thermistors), the Linear Active Thermistor IC does not require an additional signal-conditioning circuit. Therefore, the biasing circuit development overhead for thermistor solutions can be avoided by implementing this low-cost device. The voltage output pin (VOUT) can be directly connected to the ADC input of a microcontroller. The MCP9700A temperature coefficients are scaled to provide a 1°C/bit resolution for an 8-bit ADC with a reference voltage of 2.5V and 5V, respectively.The MCP9700A provide a low-cost solution for applications that require measurement of a relative change of temperature. When measuring relative change in temperature from +25°C, an accuracy of ±1°C (typical) can be realized from 0°C to +70°C. This accuracy can also be achieved by applying system calibration at +25°C.In addition, this family is immune to the effects of parasitic capacitance and can drive large capacitive loads. This provides Printed Circuit Board (PCB) layout design flexibility by enabling the device to be remotely located from the microcontroller. Adding some capacitance at the output also helps the output transient response by reducing overshoots or undershoots. However, capacitive load is not required for sensor output stability. Packaging: TAPSupplier Type: Authorized Distributor2,835 Qty Price 1 0.4551 25 0.3918 50 0.3794
Log in to Buy
MCP9700AT-E/TT quantity
This product is already in your quote request list.
DSPIC33FJ256GP710A-I/PT
Category: 16 Bit Digital Signal Controller Dsc , MCUs Microchip
Microchip dsPIC33F Series 30 kB RAM 256 kB Flash 16-Bit Digital Signal Controller TQFP-100 Packaging: BULKSupplier Type: Authorized Distributor24 Qty Price 1 10.1184 5 10.1184 25 10.1184 100 10.1184 250 10.1184
Log in to Buy
DSPIC33FJ256GP710A-I/PT quantity
This product is already in your quote request list.
PIC16F1937-I/PT
Category: 8 Bit Microcontrollers , MCUs Microchip
Microchip 28/40/44-Pin Flash-Based, 8-Bit CMOS Microcontrollers wtih LCD Driver and nanoWatt XLP Technology Packaging: TRYSupplier Type: Authorized Distributor360
Log in to Buy
PIC16F1937-I/PT quantity
This product is already in your quote request list.
ATSHA204A-STUCZ-T
Category: Authenticators , Other Drivers & Interfaces Microchip
Microchip The Microchip ATSHA204A is a full turnkey security device. It includes a 4.5Kb EEPROM divided into 16 slots. This array can be used for storage of keys, miscellaneous read/write, read-only, password or secret data, and consumption tracking. Access to the various sections of memory can be restricted in a variety of ways and then the configuration locked to prevent changes.Access to the chip is through a standard I²C interface at speeds up to 1Mb/sec. The chip also supports a single-wire interface that can reduce the number of GPIOs required on the system processor and/or reduce the number of pins on connectors. It is compatible with most UART or serial I/O controllers. System integration is eased with a wide supply voltage range and an ultra-low sleep current of less than 100nA. Packaging: TAPSupplier Type: Authorized Distributor4,481 Qty Price 1 0.873 25 0.7837 50 0.7713 100 0.7589
Log in to Buy
ATSHA204A-STUCZ-T quantity
This product is already in your quote request list.
KSZ8795CLXIC
Category: Ethernet , Ethernet Switches , Switch Microchip
Microchip The KSZ8795 is a highly-integrated, Layer 2-managed, 5-port switch with numerous features designed to reduce system cost. It is intended for cost-sensitive applications requiring four 10/100Mbps copper ports and one 10/100/1000Mbps Gigabit uplink port. The KSZ8795CLX incorporates a small package outline, lowest power consumption with internal biasing, and on-chip termination. Its extensive features set includes enhanced power management, programmable rate limiting and priority ratio, tagged and port-based VLAN, port-based security and ACL rule-based packet filtering technology, quality-of-service (QoS) priority with four queues, management interfaces, enhanced MIB counters, high-performance memory bandwidth, and a shared memory-based switch fabric with non-blocking support. The KSZ8795CLX provides support for multiple CPU data interfaces to effectively address both current and emerging fast Ethernet and Gigabit Ethernet applications where the port 5 GMAC can be configured to any of GMII, RGMII, MII and RMII modes. The KSZ8795CLX product is built upon Microchip's industry-leading Ethernet latest analog and digital technology, with features designed to offload host processing and streamline your overall design. - Four integrated 10/100Base-T/TX MAC/PHYs - One integrated 10/100/1000Base-T/TX GMAC with selectable GMII, RGMII, MII, and RMII interfaces - Small 80-pin LQFP package. Packaging: BLKSupplier Type: Authorized Distributor700 Qty Price 1 9.0396 10 8.2832 25 7.5268 50 7.4028 100 7.2788
Log in to Buy
KSZ8795CLXIC quantity
This product is already in your quote request list.
ATTINY85-20SU
Category: MCUs Microchip Technology
Microchip Technology MCU 8-bit AVR RISC 8KB Flash 3.3V/5V 8-Pin SOIC EIAJ Tube Packaging: N/ASupplier Type: Authorized Distributor360
Log in to Buy
ATTINY85-20SU quantity
This product is already in your quote request list.
ATTINY85-20SUR
Category: 8 Bit Microcontrollers , MCUs Microchip
Microchip The ATtiny85 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATtiny85 achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed. Packaging: TAPSupplier Type: Authorized Distributor481 Qty Price 1 1.984 10 1.8972 25 1.8104 50 1.736
Log in to Buy
ATTINY85-20SUR quantity
This product is already in your quote request list.
PIC16F1503T-I/SL
Category: MCUs Microchip Technology
Microchip Technology MCU 8-bit PIC RISC 3.5KB Flash 2.5V/3.3V/5V Automotive AEC-Q100 14-Pin SOIC N T/R Packaging: N/ASupplier Type: Authorized Distributor7,501 Qty Price 1 1.239 10 1.2266 25 1.2218 100 1.2169 250 1.2121 500 1.2071 1,000 1.2023 3,000 1.1975 6,000 1.1926
Log in to Buy
PIC16F1503T-I/SL quantity
This product is already in your quote request list.
TC4427AEOA
Category: Gate and Power Drivers , Gate Drivers , Mosfet Igbt Drivers Microchip
Microchip The TC4427A is improved versions of the earlier TC4427 family of MOSFET drivers. In addition to matched rise and fall times, the TC4426A/TC4427A/TC4428A devices have matched leading and falling edge propagation delay times. These devices are highly latch-up resistant under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking (of either polarity) occurs on the ground pin. They can accept, without damage or logic upset, up to 500 mA of reverse current (of either polarity) being forced back into their outputs. All terminals are fully protected against Electrostatic Discharge (ESD) up to 4 kV. The TC4427 MOSFET drivers can easily charge/discharge 1000 pF gate capacitances in under 30 ns. These devices provide low enough impedances in both the on and off states to ensure the MOSFET’s intended state will not be affected, even by large transients. Packaging: RALSupplier Type: Authorized Distributor18
Log in to Buy
TC4427AEOA quantity
This product is already in your quote request list.
TC4427AEOA713
Category: Gate and Power Drivers Microchip Technology
Microchip Technology Driver 1.5A 2-OUT Low Side Non-Inv Automotive AEC-Q100 8-Pin SOIC N T/R Packaging: N/ASupplier Type: Authorized Distributor1,250 Qty Price 250 1.6051 500 1.5475 1,000 1.4141
Log in to Buy
TC4427AEOA713 quantity
This product is already in your quote request list.
MIC39102YM-TR
Category: LDO Voltage Regulators , Linear Regulators Microchip
Microchip N/APackaging: TRSupplier Type: Authorized Distributor 2,500
Log in to Buy
MIC39102YM-TR quantity
This product is already in your quote request list.
