|
|
TC4427AEOA
Category: Gate and Power Drivers, Gate Drivers, Mosfet Igbt DriversMicrochip |
Microchip | The TC4427A is improved versions of the earlier TC4427 family of MOSFET drivers. In addition to matched rise and fall times, the TC4426A/TC4427A/TC4428A devices have matched leading and falling edge propagation delay times. These devices are highly latch-up resistant under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking (of either polarity) occurs on the ground pin. They can accept, without damage or logic upset, up to 500 mA of reverse current (of either polarity) being forced back into their outputs. All terminals are fully protected against Electrostatic Discharge (ESD) up to 4 kV. The TC4427 MOSFET drivers can easily charge/discharge 1000 pF gate capacitances in under 30 ns. These devices provide low enough impedances in both the on and off states to ensure the MOSFET’s intended state will not be affected, even by large transients.
Packaging: RAL
Supplier Type: Authorized Distributor | 18
available | | |
Log in to Buy
This product is already in your quote request list.
|
|
|
NCP51820AMNTWG
Category: Gate Driversonsemi |
onsemi | N/A
Packaging: TR
Supplier Type: Authorized Distributor | 16,000
available | | | Qty | Price |
|---|
| 4,000 | 1.302852 | | 8,000 | 1.232436 | | 16,000 | 1.2 | | 24,000 | 1.169232 | | 32,000 | 1.14 |
|
Log in to Buy
This product is already in your quote request list.
|
|
|
HIP4082IBZT
Category: Gate Drivers, No CategoryRenesas Electronics |
Renesas Electronics | The HIP4082 is a medium frequency, medium voltage H-Bridge N-Channel MOSFET driver IC, available in 16 lead plastic SOIC (N) and DIP packages. Specifically targeted for PWM motor control and UPS applications, bridge based designs are made simple and flexible with the HIP4082 H-bridge driver. With operation up to 80V, the device is best suited to applications of moderate power levels. It has a flexible input protocol for= driving every possible switch combination except those which would cause a shoot-through condition. The HIP4082’s reduced drive current allows smaller packaging and it has a much wider range of programmable dead times (0.1 to 4.5 µs) making it ideal for switching frequencies up to 200kHz. The HIP4082 does not contain an internal charge pump, but does incorporate non-latching level-shift translation control of the upper drive circuits.
Packaging: TAP
Supplier Type: Authorized Distributor | 1,515
available | | | Qty | Price |
|---|
| 1 | 5.5304 | | 10 | 4.9724 | | 25 | 4.7616 | | 50 | 4.5384 | | 100 | 4.3276 |
|
Log in to Buy
This product is already in your quote request list.
|
