M24512-WMN6TP
Category: EEPROMs STMicroelectronics
STMicroelectronics EEPROM, I2C, Serial, 512 Kbit, 64K x 8bit, 1 MHz, 8 Pins, SOIC N The M24512 is a 512-Kbit I²C-compatible EEPROM (Electrically Erasable PROgrammable Memory) organized as 64 K × 8 bits.This I²C EEPROM can operate with a supply voltage from 2.5 V up to 5.5 V over an ambient temperature range of -40 °C / 125 °C.The device Packaging: TRSupplier Type: Authorized Distributor295,000
Log in to Buy
M24512-WMN6TP quantity
This product is already in your quote request list.
24AA01T-I/OT
Category: EEPROM , EEPROMs , I2c Interface Protocol Microchip
Microchip The Microchip Technology Inc. 24AA01/24LC01B is a 1Kb Serial EEPROM. The device is organized as one block of 128 x 8-bit memory with a 2-wire serial interface. Low-voltage design permits operation down to 1.7V with standby and active currents of only 1 µA and 1 mA, respectively. The 24XX01 also has a page write capability for up to 8 bytes of data. The 24XX01 is available in the standard 8-pin PDIP, surface mount SOIC, TSSOP, 2x3 DFN and MSOP packages, and is also available in the 5-lead SOT-23 package. Packaging: TRSupplier Type: Authorized Distributor114,000
Log in to Buy
24AA01T-I/OT quantity
This product is already in your quote request list.
AT93C46EN-SH-B
Category: EEPROMs Microchip
Microchip EEPROM, 1 Kbit, 64 x 16bit, Microwire, 250 kHz, SOIC, 8 Pins The AT93C46EN-SH-B is a MICROWIRE-compatible 1kB 3-wire serial Electrically Erasable Programmable Read-Only Memory (EEPROM) organized as 64 words of 16-bit each. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential. The AT93C46E is enabled through the chip select pin (CS) and accessed via a 3-wire serial interface consisting of data input (DI), data output (DO) and shift clock (SK). Upon receiving a read instruction at DI, the address is decoded and the data is clocked out serially on the data output DO pin. The write cycle is completely self-timed and no separate erase cycle is required before write. The write cycle is only enabled when the part is in the erase/write enable state. When CS is brought high following the initiation of a write cycle, the DO pin outputs the ready/busy status of the part. Packaging: RALSupplier Type: Authorized Distributor634 Qty Price 1,400 0.207768 1,600 0.201996 3,000 0.199236 7,000 0.196536 14,000 0.19392
Log in to Buy
AT93C46EN-SH-B quantity
This product is already in your quote request list.
