|
|
M24C64-WMN6TP
Category: EEPROMsSTMicroelectronics |
STMicroelectronics | EEPROM, I2C, 64 Kbit, 8K x 8bit, 1 MHz, 8 Pins, NSOIC The M24C64 is a 64-Kbit I²C-compatible EEPROM (Electrically Erasable PROgrammable Memory) organized as 8 K × 8 bits.This I²C EEPROM can operate with a supply voltage from 2.5 V up to 5.5 V over an ambient temperature range of -40 °C / 125 °C.The device is
Packaging: TR
Supplier Type: Authorized Distributor | 225,000
available | | | Qty | Price |
|---|
| 2,500 | 0.1119 | | 5,000 | 0.11046 | | 10,000 | 0.108552 | | 15,000 | 0.106644 | | 20,000 | 0.104724 |
|
Log in to Buy
This product is already in your quote request list.
|
|
|
24AA01T-I/OT
Category: EEPROM, EEPROMs, I2c Interface ProtocolMicrochip |
Microchip | The Microchip Technology Inc. 24AA01/24LC01B is a 1Kb Serial EEPROM. The device is organized as one block of 128 x 8-bit memory with a 2-wire serial interface. Low-voltage design permits operation down to 1.7V with standby and active currents of only 1 µA and 1 mA, respectively. The 24XX01 also has a page write capability for up to 8 bytes of data. The 24XX01 is available in the standard 8-pin PDIP, surface mount SOIC, TSSOP, 2x3 DFN and MSOP packages, and is also available in the 5-lead SOT-23 package.
Packaging: TR
Supplier Type: Authorized Distributor | 114,000
available | | |
Log in to Buy
This product is already in your quote request list.
|
|
|
AT93C46EN-SH-B
Category: EEPROMsMicrochip |
Microchip | EEPROM, 1 Kbit, 64 x 16bit, Microwire, 250 kHz, SOIC, 8 Pins The AT93C46EN-SH-B is a MICROWIRE-compatible 1kB 3-wire serial Electrically Erasable Programmable Read-Only Memory (EEPROM) organized as 64 words of 16-bit each. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential. The AT93C46E is enabled through the chip select pin (CS) and accessed via a 3-wire serial interface consisting of data input (DI), data output (DO) and shift clock (SK). Upon receiving a read instruction at DI, the address is decoded and the data is clocked out serially on the data output DO pin. The write cycle is completely self-timed and no separate erase cycle is required before write. The write cycle is only enabled when the part is in the erase/write enable state. When CS is brought high following the initiation of a write cycle, the DO pin outputs the ready/busy status of the part.
Packaging: RAL
Supplier Type: Authorized Distributor | 634
available | | | Qty | Price |
|---|
| 1,400 | 0.207768 | | 1,600 | 0.201996 | | 3,000 | 0.199236 | | 7,000 | 0.196536 | | 14,000 | 0.19392 |
|
Log in to Buy
This product is already in your quote request list.
|
